Type:
SFA30
Artikelnummer:
18-000121
Hint
De ashoogte van het vaste lager is afgestemd op het loslager van de serie SLA en het moerhuis van de serie GFD.
Dimensions
| Dimensions | |||
|---|---|---|---|
| Shaft nominal diameter | 40 | mm | |
| L | 126 | mm | |
| L/2 | 63 | mm | |
| L1 | 82 | mm | |
| L2 | 84 | mm | |
| L3 | 105 | mm | |
| H | 92 | mm | |
| H1 | 50 | mm | |
| H2 | 32 | mm | |
| H3 | 13 | mm | |
| H4 | 23 | mm | |
| H5 | 21 | mm | |
| d | 30 | mm | |
| D | 80 | mm | |
| b | 28 | mm | |
| B | 53 | mm | |
| B1 | 32 | mm | |
| B2 | 12,6 | mm | |
| S1 | 12,6 | mm | |
| S2 | M14 | ||
| S3 | 9,7 | mm | |
| SC | ISO 4762-10.9 | 6 × M6 × 40 | |
| Cdyn_axial | Axial dynamic load rating | 32000 | N |
| Bearing type | ZKLF3080.2RS-PE | ||
| C0_axial | Axial static load rating | 64000 | N |
| Permissible speed | 2200 | 1/min | |
| Locknut: type | HIR 30 | ||
| Locknut: tightening torque | 32 | Nm | |
| Locknut: screw size | M6 | ||
| Locknut: screw tightening torque | 5 | ||
| Aanduiding | Categorie | Product | Grootte | Taal |
|---|---|---|---|---|
| Ballscrews | Assembly Instructions | Ballscrews | 6 MB | |
| Ballscrews | Project planning sheet | Ballscrews | 119 KB | |
| Ballscrews | Catalogue | Ballscrews | 4 MB |