Тип:
HGR15R4000C
Номер на продукт:
5-001952
Указание
Gyártási hosszúságú sín, kérjük, vegye figyelembe az eltérő tűrési értékeket a táblázatban.
Размери
| (GW_Rail_Dimensions) | |||
|---|---|---|---|
| WR | 15 | mm | |
| HR | 15 | mm | |
| D | 7,5 | mm | |
| h | 5,3 | mm | |
| d | 4,5 | mm | |
| P | 60 | mm | |
| Lmax | 3900 | mm | |
| Lmin | 72 | mm | |
| E1/2 min | 6 | mm | |
| E1/2 max | 54 | mm | |
| (GW_Rail_Dimensions_Stock) | |||
|---|---|---|---|
| L | 4.000 +20 | mm | |
| E1 | 20 ±0,5 | mm | |
| E2 | 20 +20 | mm | |
HIWIN coating HICOAT CZS
HICOAT CZS is a very thin zinc coating that offers a very good corrosion protection, even on radii and chamfers. Smaller bare parts stay protected by the cathodic corrosion protection. Compared with uncoated pieces this leads to significantly higher periods of use. The CZS coating is available for the HG, EG and CG series. Further information can be found in the catalogue "Linear Guideways" under chapter "HIWIN coatings for linear guideways".
HIWIN coating HICOAT CTS
HICOAT CTS is a thin layer chrome coating that offers good corrosion protection and a very high wear protection. The high wear protection results from the extraordinary hardness of the coating. The CTS coating is free of Cr(VI) and suitable for use in food stuffs. It is available for the HG, EG, CG and WE series. Further information can be found in the catalogue "Linear Guideways" under chapter "HIWIN coatings for linear guideways".
| Обозначение | Категория | Продукт | Размер | Език |
|---|---|---|---|---|
| Водач за профилни шини | Каталог | Водач за профилни шини | 7 MB | |
| Водачи за профилни шини CG | Флаер | Водач за профилни шини | 299 KB | |
| Водач за профилни шини | Инструкции за монтаж | Водач за профилни шини | 2 MB | |
| Водач за профилни шини | Проектна спецификация | Водач за профилни шини | 2 MB |
Монтаж и демонтаж на капаците
??????????? ??????? ?? ?????????, ?? ?? ????????? ?????????? ?????? ?? ?????????? ???? ?? ??????? ? ????????????. ? ???? ????? ?? ?? ??????? ??? ????? ?? ????????? ? ??????? ?????????, ????????? ??? ??????????? ???????.
Машинно или ръчно скосяване
? ?????????? ????? ?????? ?? ?????? ??? ?? ???????? ????????? ?? ?????? ?? ?????? ?? ???????? ???? ????? ?????????, ???? ? ?????.
Съпротивление на преместване в зависимост от условията на смазване
??????????????? ?? ??????????? ?? ???????? ???? ?????? ?? ????? ???????, ???? ???????? ???????????, ???????????, ???????? ???????? (????, ????? ????, ?????), ?????????? ???????? ????????, ??????? ?? ????????, ?????, ?????? ??? ???????????? ???????. ????????????, ????????? ????????? ?? ??????????????? ?? ??????????? ? ???????? ???? ??? ?????????? ??????? ???????. ????? ?????? ??? ? ?????????? ???????? ? ??????????? ?? ??????????. ??????? ? ?????? ??????? ????????? ??????????????? ?? ??????????? ?? ????????? ??????????. ?? ???? ???? ???? ?? ???????????? ?? 15 ????? ??????????????? ?? ??????????? ???????? ?????? ? ????? 50%.
Принцип на работа на водач за профилни шини
????? ?? ???????? ???? ????????? ??????? ???????? ? ??????? ?? ????????? ????????. ???? ???????????? ?? ????? ??? ????? ????? ??????? ? ???????? ???? ??????? ?? ???????? ???? ???? ?? ???????? ???????????? ???????? ??????? ????????.
Устройство за дългосрочно смазване на водач за профилни шини
???????????? ?? ??????????? ???????? ?? ???????? ?? ???????? ???? ????????? ??????????? ??????????? ?? ??????????? ?? ???????? ? ?? ???? ????? ?????????? ?????????? ?? ???? ?? ??????????? ?? ?????????? ??????????. ? ?????????? ?? ???????????? ?? ???? ?????? ???? ????? ?? ?? ???????? ?? ??? ?????????? ?? ??????????? ????????.