Skip to content Skip to navigation menu
HT250LA33
Type:
HT250LA33
Configure
CAD
Sizing

Dimensions

Max. acceleration amax depending on the external payload mext

Deflection w over unsupported axis length LAW under payload

Dimensions
Lc Total carriage length 425 mm
B Switch position 178,5 mm
C Switch position 213,5 mm
LT Total length LT = LST + 571 mm
Load data
Fydynmax Ultimate force 11600 N
Fzdynmax Ultimate force 13165 N
Mxdynmax Maximum torque 1126 Nm
Mydynmax Maximum torque 1942 Nm
Mzdynmax Maximum torque 1711 Nm
z Upper carriage edge to guiding centre 68,07 mm
General technical data
vmax Max. speed 5 m/s
amax Max. acceleration 80 m/s²
Load capacity 250 kg
Maximum total length 5940 mm
Repeatability ± 0.005 mm
Flatness ± 0.03 mm/300 mm
Straightness ± 0.03 mm/300 mm
Ix Area moment of inertia of profile cross-section 3265771 mm⁴
Iy Area moment of inertia of profile cross-section 39262043 mm⁴
Guiding
Guiding type QHH25CA
Cdyn Dynamic load rating 41900 N
C0 Static load rating 48750 N
Drive
Linear motor LMSA33
Continuous force 875 N
Peak force 2469 N
Mechanical properties
Carriage mass 14,58 kg
Mass at 0 stroke 32,31 kg
Mass per 1 m stroke 30,15 kg/m
Fl Carriage displacement force 8 N
Details
Cover strip
The steel cover strip prevents dirt and dust from entering the axis interior. In addition, the cover strip allows the axes to be used in areas with coarse, sharp-edged or hot foreign bodies. The magnetic strips integrated in the axis profile hold the belt securely in position and increase the sealing effect.
Lubrication
For convenient maintenance of the linear axis, a separate grease nipple is fitted to the left and right of the carriage for each lubrication point. This ensures optimum accessibility for relubrication, even under difficult installation conditions. For further information on lubrication and maintenance, please refer to the assembly instructions.
Accessories
Name Article number Description  
Bumper for linear motor stageTUBUS 8-13-0008 Anschlagpuffer  
Name Article number Description  
Magnetleiste HT250 L=7,5m 25-001196 Magnetleiste  
Name Article number Description  
Limit switch, 4 m cable (NC) 25-000787 Endschalter  
Name Article number Description  
Adapter set CPN HT250 – HM080 25-001613 Adapter für Linearachssysteme  
Adapter set CPN HT250 – HM120 25-001614 Adapter für Linearachssysteme  
Adapter set CPN HT250 – HT200 25-001620 Adapter für Linearachssysteme  
Adapter set CPN HT250 – HT250 25-001621 Adapter für Linearachssysteme  
Adapter set CPN 2×HM120 – HT250 25-001607 Adapter für Linearachssysteme  
Adapter set CPR HT250 – HM080 25-001573 Adapter für Linearachssysteme  
Adapter set CPR HT250 – HM120 25-001574 Adapter für Linearachssysteme  
Adapter set CPR HT250 – HT200 25-001580 Adapter für Linearachssysteme  
Adapter set CPR HT250 – HT250 25-001581 Adapter für Linearachssysteme  
Adapter set CPR 2×HM120 – HT250 25-001567 Adapter für Linearachssysteme  
Adapter set CCN HT250 – HM/HC080 25-001587 Adapter für Linearachssysteme  
Adapter set CCN HT250 – HM120 25-001646 Adapter für Linearachssysteme  
Adapter set CCN HT250 – HT200 25-001593 Adapter für Linearachssysteme  
Adapter set CCN HT250 – HT250 25-001647 Adapter für Linearachssysteme  
Name Article number Description  
Clamping prof.short HM/HT size 8(4 pcs.) 25-000519 Spannprofil  
Clamping prof.long HM/HT size 8(4 pcs.) 25-000520 Spannprofil  
T nut HM/HT size 8 M5 pu 10 pcs. 20-000532 Nutenstein  
T nut HM/HT size 8 M6 pu 10 pcs. 20-000533 Nutenstein  
T nut HM/HT size 8 M8 pu 10 pcs. 20-000534 Nutenstein  
Centring sleeve 15h6 pu 10 pcs. 25-000513 Zentrierhülse  
Groove cover HM/HT size 8 L=2m pu 5 pcs. 25-000516 Nutabdeckung  
Name Article number Description  
Tape for reduction of noise emissions from the energy chain 25-002485 Band zur Geräuschreduktion der Energiekette  
Name Article number Description  
Cover strip guide for HT250B, HT250L 25-002632 Abdeckbandführung  
Name Article number Description  
Strip deflection Set HT250 25-001206 Bandumlenkung  
Name Article number Description  
Motor cable, M23 8-pin - open end, 3m 8-10-0069 Motorleitung  
Motor cable, M23 8-pin - open end, 5m 8-10-0070 Motorleitung  
Motor cable, M23 8-pin - open end, 8m 8-10-0071 Motorleitung  
Motor cable, M23 8-pin - open end, 10m 8-10-0072 Motorleitung  
Motor cable, M23 8-pin - open end, 15m 8-10-0074 Motorleitung  
Encoder cable M17 17-pin, analogue, 15 m 8-10-1861 Encoderleitung  
Encoder cable M17 17-pin, analogue, 12 m 8-10-1860 Encoderleitung  
Encoder cable M17 17-pin, analogue, 10 m 8-10-1859 Encoderleitung  
Encoder cable M17 17-pin, analogue, 8 m 8-10-1858 Encoderleitung  
Encoder cable M17 17-pin, analogue, 5 m 8-10-1857 Encoderleitung  
Encoder cable M17 17-pin, analogue, 3 m 8-10-1856 Encoderleitung  
Encoder cable M17 17-pin TTL 8-10-1862 Encoderleitung  
Encoder cable M17 17-pin TTL 8-10-1863 Encoderleitung  
Encoder cable M17 17-pin TTL 8-10-1864 Encoderleitung  
Encoder cable M17 17-pin TTL 8-10-1865 Encoderleitung  
Encoder cable M17 17-pin TTL 8-10-1866 Encoderleitung  
Encoder cable M17 17-pin TTL 8-10-1867 Encoderleitung  
Encoder cable M17 17-pin absolute, 15m 8-10-1873 Encoderleitung  
Encoder cable M17 17-pin absolute, 12m 8-10-1872 Encoderleitung  
Encoder cable M17 17-pin absolute, 10m 8-10-1871 Encoderleitung  
Encoder cable M17 17-pin absolute, 8m 8-10-1870 Encoderleitung  
Encoder cable M17 17-pin absolute, 5m 8-10-1869 Encoderleitung  
Encoder cable M17 17-pin absolute, 3m 8-10-1868 Encoderleitung  
Encoder cable INC+Hall, M17 - open end, 10m 80028218 Encoderleitung  
Encoder cable INC+Hall, M17 - open end, 5m 80028203 Encoderleitung  
Encoder cable INC+Hall, M17 - open end, 3m 80028093 Encoderleitung  
Name Article number Description  
Set Bedämpfungselement HT 25-001031 Bedämpfungselement  
Downloads
Name Category Product Size Language
Linear axes and axis systems HX Catalogue Linear axes & linear axis systems 13 MB
Linear motor axes HT-L, HB-L Assembly Instructions Linear axes & linear axis systems 2 MB
Linear axes HM, HT, HB, HD Project planning sheet Linear axes & linear axis systems 285 KB
Go to download centre
HIWIN HX: One axis family – countless possibilities
An innovative design, two designs, three drive types and countless possibilities. The bendable HIWIN HX axis system offers the right solution for your ideas.
Installation of the limit switches and adjustment of the switching distance for HIWIN linear axes
The limit switches or additional reference switches are quick and easily to install in HIWIN linear axes, and positioning is continuously variable. The switching distance to the damping element can be set easily using a feeler gauge. We’ll show you how in this video. Tools/Equipment recommendation: - 6-edged offset screwdriver set, feeler gauge, scale, assembly instructions.
Cover strip change in a linear table HT
The cover strip can be changed quickly and easily in the HIWIN HT linear tables. We’ll show you how in this video. Tools/Equipment recommendation: 6-edged offset screwdriver set, cut-resistant gloves, permanent marker, bracket, tin snips, lint-free cloth, assembly instructions.