Typ:
CRGR30R4000H
Číslo položky:
12-000613
Upozornění
Kolejnice ve výrobní délce, vezměte prosím na vědomí odchylky v tabulce.
Dimensions
| Afmetingen | |||
|---|---|---|---|
| WR | Railbreedte | 28 | mm |
| HR | Railhoogte | 28 | mm |
| D | 14 | mm | |
| h | 12 | mm | |
| d | 9 | mm | |
| P | Deling boring | 40 | mm |
| Lmax | Max. lengte (E1 = E2 = P/2) | 3920 | mm |
| Lmin | Min. lengte | 98 | mm |
| E1/2 min | 9 | mm | |
| E1/2 max | 31 | mm | |
| Gewicht | 4,41 | kg/m | |
| Afmetingen (rail in productielengte) | |||
|---|---|---|---|
| L | Totale lengte | 4.000 +20 | mm |
| E1 | 20 ±0,5 | mm | |
| E2 | 20 +20 | mm | |
| Označení | Kategorie | Produkt | Velikost | Jazyk |
|---|---|---|---|---|
| Profielrailgeleidingen | Projectblad | Profielrailgeleidingen | 2 MB | |
| Profielrailgeleidingen | Montagehandleiding | Profielrailgeleidingen | 4 MB | |
| CG lineaire geleidingen | Flyer | Profielrailgeleidingen | 298 KB | |
| Profielrailgeleidingen | Catalogus | Profielrailgeleidingen | 7 MB |
Principle of operation of a linear guideway
A linear guideway makes it possible to move in a linear motion with rolling elements. The use of balls and rolls between the rail and block in a linear guideway makes precise linear movements possible.
New CG linear guideway from HIWIN – Hannover Messe 2018
Expansion of the product range, no matter whether you need an X or O shape. The right linear guideway for any application.
Displacement resistance depending on lubrication condition
The displacement resistance of a carriage depends on many factors, e.g. load, temperature, lubricant (grease, fluid grease, oil), lubricant quantity, travel speed, series, size or the sealing system. A concrete specification of the displacement resistance is therefore only possible with defined general conditions. An essential factor here is the lubricant and the lubrication condition. Especially in freshly lubricated condition, the displacement resistance is clearly increased. However, after a running-in period of 15 metres, the displacement resistance is reduced again by approx. 50%.
Machine blank of cover strip
In this video, we show you the precision with which we cut cover strips.
Mechanical or manual chamfering
In the following video, you can see how chamfering edges on linear guideways works both mechanically and manually.
Cover strip cut by machine vs. cut manually
In the following video you can see how to cut cover strips by machine or manually.
Long-term lubrication unit of a linear guideway
The long-term lubrication unit for linear guideways ensures that lubrication intervals can be increased many times over, thus reducing the number of maintenance intervals significantly. Depending on requirements, up to two long-term lubrication units can be mounted on each block.
Assembly and disassembly of cover caps
The cover caps are used to keep the mounting holes of the profile rails free of chips and dirt. In this video, we show you how to easily assemble and disassemble steel, brass or plastic cover caps.
Exchange of the cover strip – CG linear guideways with block
Easy installation, better protection against dirt ingress and wear of the end seals. With the HIWIN cover strip, you achieve longer lifetimes with shorter assembly times. Even with installed blocks, HIWIN linear guideways can be equipped with a cover strip or exchanged for a cover strip if necessary. We’ll show you how in this video.
Assembly and disassembly of the cover strip
Easy installation, better protection against dirt ingress and wear of the end seals. With the HIWIN cover strip, you achieve longer lifetimes with shorter assembly times. In this video, we show you how to easily assemble and disassemble the HIWIN cover strip.