Skip to content Skip to navigation menu
WER21R
Type:
WER21R4000H
Article number:
5-000852

Hint

Rail in manufacturing length, please note the deviating tolerance specifications in the table.

Dimensions

Dimensions
WR Rail width 37 mm
WB 22 mm
HR Rail height 11 mm
D 7,5 mm
h 5,3 mm
d 4,5 mm
P Hole pitch 50 mm
Lmax Max. length (E1 = E2 = P/2) 3950 mm
Lmin Min. length 62 mm
E1/2min 6 mm
E1/2max 44 mm
Weight 3 kg/m
Dimensions (rail in production length)
L Total length 4.000 +20 mm
E1 15 ±0,5 mm
E2 35 +20 mm
HIWIN coating HICOAT CTS
HICOAT CTS is a thin layer chrome coating that offers good corrosion protection and a very high wear protection. The high wear protection results from the extraordinary hardness of the coating. The CTS coating is free of Cr(VI) and suitable for use in food stuffs. It is available for the HG, EG, CG and WE series. Further information can be found in the catalogue "Linear Guideways" under chapter "HIWIN coatings for linear guideways".

Name Article number Description  
WEH21CAZ0H 5-000842 Laufwagen  
WEH21CAZAH 5-000843 Laufwagen  
WEH21CAZBH 5-000844 Laufwagen  
WEH21CAZ0C WEH21CAZ0C Laufwagen  
WEH21CAZAC WEH21CAZAC Laufwagen  
WEH21CAZBC WEH21CAZBC Laufwagen  
WEH21CAZ0P WEH21CAZ0P Laufwagen  
WEH21CAZAP WEH21CAZAP Laufwagen  
WEH21CAZBP WEH21CAZBP Laufwagen  
QWH21CA QWH21CAZBH Laufwagen  
QWH21CA R:2515515984 Laufwagen  
QWH21CA R:2515515985 Laufwagen  
QWH21CAZ0C QWH21CAZ0C Laufwagen  
QWH21CAZAC QWH21CAZAC Laufwagen  
QWH21CAZBC QWH21CAZBC Laufwagen  
QWH21CAZ0P QWH21CAZ0P Laufwagen  
QWH21CAZAP QWH21CAZAP Laufwagen  
QWH21CAZBP QWH21CAZBP Laufwagen  
QWH21CAZ0UP QWH21CAZ0UP Laufwagen  
QWH21CAZAUP QWH21CAZAUP Laufwagen  
QWH21CAZBUP QWH21CAZBUP Laufwagen  
Name Article number Description  
C4 packing unit 200 pcs. 5-002218 Abdeckkappe  
C4-B packing unit 1000 pcs. 5-002378 Abdeckkappe  
C4-M 5-001344 Abdeckkappe  
Name Category Product Size Language
Linear guideways Assembly Instructions Linear guideways 5 MB
Linear guideways Project planning sheet Linear guideways 173 KB
Linear guideways Catalogue Linear guideways 7 MB
Go to download centre
Principle of operation of a linear guideway
A linear guideway makes it possible to move in a linear motion with rolling elements. The use of balls and rolls between the rail and block in a linear guideway makes precise linear movements possible.
Displacement resistance depending on lubrication condition
The displacement resistance of a carriage depends on many factors, e.g. load, temperature, lubricant (grease, fluid grease, oil), lubricant quantity, travel speed, series, size or the sealing system. A concrete specification of the displacement resistance is therefore only possible with defined general conditions. An essential factor here is the lubricant and the lubrication condition. Especially in freshly lubricated condition, the displacement resistance is clearly increased. However, after a running-in period of 15 metres, the displacement resistance is reduced again by approx. 50%.

Mechanical or manual chamfering
In the following video, you can see how chamfering edges on linear guideways works both mechanically and manually.
Long-time lubrication unit of a linear guideway
The long-time lubrication unit for linear guideways makes it possible to increase lubrication intervals many times over, thereby considerably reducing the number of maintenance intervals. If needed, up to two long-time lubrication unit can be installed per block.
Assembly and disassembly of cover caps
The cover caps are used to keep the mounting holes of the profile rails free of chips and dirt. In this video, we show you how to easily assemble and disassemble steel, brass or plastic cover caps.